篇首语:本文由小编为大家整理,主要介绍了云原生分布式存储系统FastCFS安装简明教程相关的知识,希望对你有一定的参考价值。
云原生分布式存储系统FastCFS安装简明教程
本篇文章转载于 FastCFS 作者 余庆 大佬的 FastDFS分享与交流 公众号。
我将自己部署 FastCFS集群 以及和 k8s集群 打通的全过程分享出来,希望能够帮助到尝试使用 FastCFS 的同学。
1. 快速部署
如果你只是想简单快速上手体验 FastCFS,作为学习或者本地测试环境而非生产环境,你可以选择以下两种方式部署 FastCFS:
- 部署本地单节点
- Docker部署
1.1 单机部署
单机部署 FastCFS 的 github 和 gitee 上面已经提供了比较完整的文档说明。我这里摘抄一些,并做下说明:
-
前提是安装的机器必须已经安装git客户端;
-
仅支持Centos7、Centos8两个Linux发行版本,笔者在Centos7环境亲测成功。
一键搭建(包括部署和运行)单节点(需要 root 身份执行):
git clone https://gitee.com/fastdfs100/FastCFS.git; cd FastCFS/./helloWorld.sh# 注意:helloWorld.sh将更改FastCFS相关配置文件,请不要在多节点集群上执行!
上述操作完成后,执行命令验证安装状态:
df -h /opt/fastcfs/fuse | grep fuse
如果可以看到 FastCFS 挂载的文件目录,说明安装成功,你可以把 /opt/fastcfs/fuse 当作本地文件系统访问该目录。
如果没有安装 git 客户端,也没有问题,只需要下载两个 sh 文件并放到同一个文件夹即可,它们是:
- helloWorld.sh
- fastcfs.sh(值得注意的是 fastcfs.sh支持源码编译安装,但是个人觉得并不适合一键部署)
安装命令如下(有 git 客户端且已经按上一步安装成功的可以略过)
mkdir fastcfscd fashcfswget https://toscode.gitee.com/fastdfs100/FastCFS/raw/master/helloWorld.shwget https://toscode.gitee.com/fastdfs100/FastCFS/raw/master/fastcfs.shchmod +x helloWorld.shchmod +x fastcfs.sh./helloWorld.sh
一键部署的详细说明,请参见这里一键部署详细说明
1.2 Docker部署
官方暂时没有提供 Docker 镜像,为了方便大家快速体验,笔者制作了一个单机版本的镜像,已经 push 到 Docker Hub,地址为:https://hub.docker.com/r/jerry6290/fastcfs
启动方式:
docker run --name=fastCFS --privileged -d jerry6290/fastcfs:v3.1.0# v3.1.0是版本号,可以根据实际情况修改成最新版本号。
注意: 由于需要通过 fuse 把 FastCFS 作为目录挂载,所以在 docker run 时需要增加参数 –privileged,让容器真正有 root 权限。
登录到容器验证fastCFS
docker exec -it fastCFS sh# 执行 df -h ,应该能看到 fastCFS的fs pool 被挂载到 /opt/fastcfs/fuse 目录df -hFilesystem Size Used Avail Use% Mounted onoverlay 500G 110G 391G 22% /tmpfs 64M 0 64M 0% /devtmpfs 12G 0 12G 0% /sys/fs/cgroupshm 64M 0 64M 0% /dev/shm/dev/mapper/centos-root 500G 110G 391G 22% /etc/hosts/dev/fuse 342G 0 342G 0% /opt/fastcfs/fuse# 写文件echo "Hello FastCFS" > /opt/fastcfs/fuse/FastCFS.txt# 查看文件内容cat /opt/fastcfs/fuse/FastCFS.txtHello FastCFS
当然,你也可以通过 -v 的方式把 /opt/fastcfs/fuse 目录挂载出来,具体做法就不赘述了。
该 Dockerfile 开源在 github,并通过 github Actions 自动打包并 push 到 docker hub,项目地址:https://github.com/jerry6290/dockerImage-fastCFS-Server
2. 集群部署
2.1 软硬件环境准备
FastCFS 作为一款开源云原生分布式存储系统,可以很好的部署和运行在 Intel 架构服务器环境和主流虚拟化环境,并支持绝大多数的主流硬件和网络, 支持主流的 Linux 操作系统环境。
2.1.1 操作系统发行版本要求
Linux 操作系统平台 | 版本 |
---|---|
Red Hat Linux | 7.x及以上的版本 |
CentOS | 7.x 及以上的版本 |
Ubuntu LTS | 16.04 及以上的版本 |
2.1.2 服务器建议配置
FastCFS 有三大组件:FastDIR、FastStore 和 FastAuth,支持部署和运行在 Intel x86-64 架构的 64 位通用硬件服务器平台(ARM 架构也是支持的,但需要使用源码编译)。
对于开发、测试和生产环境的服务器硬件配置有以下要求和建议:
开发及测试环境:
组件 | CPU | 内存 | 硬盘 | 网络 | 实例数量 |
---|---|---|---|---|---|
FastDIR | 4核+ | 8G+ | 无特殊要求 | 千兆网卡 | 1(可和FastStore,FastAuth同机器) |
FastStore | 4核+ | 8G+ | 无特殊要求 | 千兆网卡 | 1(可和FastDIR,FastAuth同机器) |
FastAuth | 4核+ | 8G+ | 无特殊要求 | 千兆网卡 | 1(可和FastStore,FastDIR同机器) |
生产环境:
组件 | CPU | 内存 | 硬盘 | 网络 | 实例数量 |
---|---|---|---|---|---|
FastDIR | 8核+ | 16G+ | 无特殊要求 | 千兆网卡 | 3及以上,最好是奇数(可和FastStore,FastAuth同机器) |
FastStore | 8核+ | 16G+ | 最好是SSD,容量大一些 | 千兆网卡 | 6及以上,可根据需求的容量而定(可和FastDIR,FastAuth同机器) |
FastAuth | 8核+ | 16G+ | 无特殊要求 | 千兆网卡 | 3及以上,最好是奇数(可和FastStore,FastDIR同机器) |
注意:
- FastStore 对服务器和数据均采用分组方式,服务器分组简称 SG,组内的数据是冗余关系(服务器数即数据副本数)。一个 SG 可以容纳多个数据分组 DG,引入 DG 的主要目的是方便扩容时做数据迁移,因此最好预设得大一些,生产环境至少配置 256,开发测试环境至少配置 16 个。
- 生产环境建议建 2个以上SG,每个 SG 有 3 台服务器,即 3个数据副本,所以存储数据的组件 FastStore 建议至少 2*3=6 台服务器,以保证数据完整性。
- FastAuth 是可选,如果需要通过 CSI 集成到 k8s,则需要 开启存储池 或 访问权限控制,需要部署 FastAuth 认证集群。
- FastDIR启用存储插件的话,最好配置 SSD。
- 如果对性能和可靠性有更高的要求,FastDIR,FastStore,FastAuth 三大组件应尽可能分开部署。
2.2 环境及配置准备
2.2.1 SSH免密登录
找一个服务器当中控机,比如:192.168.0.201
,以 root 用户登录到中控机,执行以下命令。将 192.168.0.204
替换成你的 受控机器 IP,按提示输入受控机器 root 用户密码,执行成功后即创建好 SSH 互信,其他机器同理。
ssh-keygen -t rsa# 一路回车ssh-copy-id 192.168.0.204
验证 ssh 免密是否成功,在中控机,通过 ssh 的方式登录受控机器 IP。如果不需要输入密码并登录成功,即表示 SSH 互信配置 成功,如果没有成功请检查受控机器的 sshd 配置和相关安全策略。
ssh 192.168.0.204
2.2.2 端口准备
- FastDIR
默认集群端口 11011
默认服务端口 11012 - FastAuth
默认集群端口 31011
默认服务端口 31012 - FastStore
默认集群端口 21014
默认副本端口 21015
默认服务端口 21016
需要保证每台服务器上述的端口是相互能通的,如果是在 redhat7、centos7 版本及以上版本,可以通过 firewall-cmd 命令打开服务器之间端口通信。比如在网段 192.168.0.1/24,可以通过以下命令打开端口,其中 网段 和 –zone=public 需要自行根据自己的 zone 进行调整:
firewall-cmd --permanent --zone=public --add-rich-rule="rule family="ipv4" source address="192.168.0.1/24" port protocol=tcp port=11011-11012 accept"firewall-cmd --permanent --zone=public --add-rich-rule="rule family="ipv4" source address="192.168.0.1/24" port protocol=tcp port=21014-21016 accept"firewall-cmd --permanent --zone=public --add-rich-rule="rule family="ipv4" source address="192.168.0.1/24" port protocol=tcp port=31011-31012 accept"firewall-cmd --reload
2.3 集群拓扑规划
FastCFS 支持大规模的集群,下面以最为典型的最小化集群拓扑:3台服务器组成的 1个SG(即 3数据副本)。更大规模的安装方式可参照此过程扩展安装,服务器的数量及配置参数按上文所述。
本次安装教程,笔者手头上的机器有限,准备了 4 台机器,已经安装好 centos7.9,对应的端口防火墙已经打开,,集群拓扑规划如下:
-
3 个 FastStore 节点、3 个 FastDIR 节点、3 个 FastAuth 节点,一个 fuse 客户端节点
-
FastStore、FastDIR、FastAuth 公用 3 个节点。
组件 | 服务器IP | 个数 |
---|---|---|
FastDIR | 192.168.0.201,192.168.0.204,192.168.0.205 | 3 |
FastStore | 192.168.0.201,192.168.0.204,192.168.0.205 | 3 |
FastAuth | 192.168.0.201,192.168.0.204,192.168.0.205 | 3 |
Fast-fuse客户端 | 192.168.0.203 | 1 |
2.4 集群安装与配置
2.4.1 yum方式安装
FastOS.repo yum源
需要在每个节点安装,命令:
rpm -ivh http://www.fastken.com/yumrepo/el7/x86_64/FastOSrepo-1.0.0-1.el7.centos.x86_64.rpm
安装FastDIR
分别在 192.168.0.201,204,205
安装
yum install fastDIR-server -y
安装完毕后,在 /etc/fastcfs 下可看到 FastDIR 的配置文件,在 /usr/bin/ 目录看到 fdir_* 相关的程序。
$ ll /etc/fastcfs/fdir/total 16-rw-r--r--. 1 root root 134 Jan 20 23:24 client.conf-rw-r--r--. 1 root root 291 Jan 20 23:24 cluster.conf-rw-r--r--. 1 root root 2160 Jan 20 23:24 server.conf-rw-r--r--. 1 root root 726 Jan 20 23:24 storage.confll /usr/bin/ | grep fdir_*-rwxr-xr-x. 1 root root 11336 Jan 20 20:51 fdir_cluster_stat-rwxr-xr-x. 1 root root 11472 Jan 20 20:51 fdir_getxattr-rwxr-xr-x. 1 root root 11344 Jan 20 20:51 fdir_list-rwxr-xr-x. 1 root root 7200 Jan 20 20:51 fdir_list_servers-rwxr-xr-x. 1 root root 11344 Jan 20 20:51 fdir_mkdir-rwxr-xr-x. 1 root root 11312 Jan 20 20:51 fdir_remove-rwxr-xr-x. 1 root root 11312 Jan 20 20:51 fdir_rename-rwxr-xr-x. 1 root root 234208 Jan 20 20:51 fdir_serverd-rwxr-xr-x. 1 root root 11384 Jan 20 20:51 fdir_service_stat-rwxr-xr-x. 1 root root 11328 Jan 20 20:51 fdir_setxattr-rwxr-xr-x. 1 root root 11328 Jan 20 20:51 fdir_stat
安装FastStore
分别在 192.168.0.201,204,205
安装
yum install faststore-server -y
安装完毕后,在 /etc/fastcfs 下可看到 FastStore 的配置文件,在 /usr/bin/ 目录看到 fs_* 相关的程序。
ll /etc/fastcfs/fstore/total 16-rw-r--r--. 1 root root 147 Jan 20 23:24 client.conf-rw-r--r--. 1 root root 1739 Jan 20 23:24 cluster.conf-rw-r--r--. 1 root root 1274 Jan 20 23:24 server.conf-rw-r--r--. 1 root root 673 Jan 20 23:24 storage.confll /usr/bin/ |egrep " fs_"-rwxr-xr-x. 1 root root 11488 Jan 13 10:32 fs_cluster_stat-rwxr-xr-x. 1 root root 11440 Jan 13 10:32 fs_delete-rwxr-xr-x. 1 root root 11480 Jan 13 10:32 fs_read-rwxr-xr-x. 1 root root 447336 Jan 13 10:32 fs_serverd-rwxr-xr-x. 1 root root 11424 Jan 13 10:32 fs_service_stat-rwxr-xr-x. 1 root root 11456 Jan 13 10:32 fs_write
安装FastAuth
分别在 192.168.0.201,204,205
安装
yum install FastCFS-auth-server -y
安装完毕后,在 /etc/fastcfs 下可看到 FastAuth 的配置文件
ll /etc/fastcfs/auth/total 20-rw-r--r--. 1 root root 411 Jan 21 00:47 auth.conf-rw-r--r--. 1 root root 134 Jan 21 00:47 client.conf-rw-r--r--. 1 root root 148 Jan 21 19:18 cluster.confdrwxr-xr-x. 2 root root 51 Jan 21 15:47 keys-rw-r--r--. 1 root root 1627 Jan 21 00:47 server.conf-rw-r--r--. 1 root root 145 Jan 21 00:47 session.conf
安装Fast-fused客户端
客户端只需要在 192.168.0.203 安装
yum remove fuse -yyum install FastCFS-fused -y
说明:
- centos 版本中的 fuse 为老版本的包(fuse2.x),需要卸载才可以成功安装 FastCFS-fused 依赖的 fuse3;
- 第一次安装才需要卸载 fuse 包,以后就不用执行了。
安装完毕后,在 /etc/fastcfs 下可看到 fcfs 的配置文件
ll /etc/fastcfs/total 0drwxr-xr-x 3 root root 113 Feb 3 14:38 authdrwxr-xr-x 2 root root 23 Feb 3 14:38 fcfsdrwxr-xr-x 2 root root 84 Feb 3 14:38 fdirdrwxr-xr-x 2 root root 84 Feb 3 14:38 fstore
2.4.2 集群配置
FastCFS 并没有统一的配置中心,需要在各个节点上单独部署配置文件。配置文件分为三大类:集群配置文件、服务配置文件、客户端配置文件。
-
集群配置文件: 指的是描述 FastDIR 、 FastStore、FastAuth 的配置文件,入口文件名称为 cluster.conf . 该配置文件中设定是 集群的参数,如 服务节点的IP、服务端口号、集群同步端口号,服务节点的拓扑结构等。cluster.conf 文件全局统一,各个节点上的内容是相同的。
-
服务配置文件: 指的是服务本身的配置文件,入口文件名称 server.conf ,文件内容有 线程数量、链接数量、缓冲区大小、存储配置、日志配置等。服务配置文件的内容,可以全局不统一。不过从集群运维方便的角度考虑,服务器配置最好是统一的。
-
客户端配置文件: 指的是 fuse 或者其他客户端的配置,比如 fuse 客户端需要知道 fdir、fstore、fauth 的集群情况,所以客户端需要 fdir、fstore 和 fauth 的 server 服务集群的配置。
下面针对三大组件和客户端的配置进行详细说明:
fdir 配置
用 root 登录主控机 192.168.0.201
- 修改 fdir 集群配置文件
修改 /etc/fastcfs/fdir/cluster.conf 文件,修改为上面提到的三个IP地址(修改成你自己对应的IP),[sever-1]为192.168.0.201,[sever-2]为192.168.0.204,[sever-3]为192.168.0.205,如果你有更多 fdir 节点,增加配置 [server-N] 即可,修改后的内容如下:
# config the auth config filenameauth_config_filename = ../auth/auth.conf[group-cluster]# the default cluster portport = 11011[group-service]# the default service portport = 11012[server-1]host = 192.168.0.201 #节点1[server-2]host = 192.168.0.204 #节点2[server-3]host = 192.168.0.205 #节点3
- 修改 fdir 服务配置文件
修改 /etc/fastcfs/fdir/server.conf 文件,内容如下:
# the base path to store log files# this path must be existbase_path = /opt/fastcfs/fdir# the path to store data files# can be an absolute path or a relative path# the relative path for sub directory under the base_path# this path will be created auto when not exist# default value is datadata_path = data# max concurrent connections this server support# you should set this parameter larger, eg. 10240# default value is 256max_connections = 10240# the data thread count# these threads deal CUD (Create, Update, Delete) operations# dispatched by the hash code of the namespace# if you have only one namespace, you should config this parameter to 1,# because it is meaningless to configure this parameter greater than 1 in this case# default value is 1data_threads = 1# the cluster id for generate inode# must be natural number such as 1, 2, 3, ...### IMPORTANT NOTE: do NOT change the cluster id after set because the 64 bits## inode includes the cluster id, and the inode disorder maybe## lead to confusioncluster_id = 1# config cluster serverscluster_config_filename = cluster.conf# session config filename for authsession_config_filename = ../auth/session.conf[storage-engine]# if enable the storage engine### false: use binlog directly### true: use storage engine for massive files# default value is false,如果设置为true,还需要配置storage.confenabled = false# the config filename for storagestorage_config_filename = storage.conf# the path to store the data files# can be an absolute path or a relative path# the relative path for sub directory under the base_path# this path will be created auto when not exist# default value is dbdata_path = db# the interval for lru elimination# <= 0 for never eliminate# unit: seconds# default value is 1eliminate_interval = 1# the memory limit ratio for dentry# the valid limit range is [1%, 99%]# default value is 80%memory_limit = 80%[cluster]# the listen portport = 11011# the network thread count# these threads deal network io# dispatched by the incoming socket fd# default value is 4work_threads = 2[service]port = 11012work_threads = 4
server.conf 基本上用默认配置即可,如果需要开启存储插件,需要把 [storage-engine] 下面的 enable=true,同时配置 storage.conf。
- 复制 cluster 文件到其他节点
fdir 的 cluster.conf, server.conf 配置完成后,把 cluster.conf 配置文件通过 scp 命令复制到其他节点(包括客户端节点),server.conf 不需要复制:
scp /etc/fastcfs/fdir/cluster.conf 192.168.0.204:/etc/fastcfs/fdir/cluster.confscp /etc/fastcfs/fdir/cluster.conf 192.168.0.205:/etc/fastcfs/fdir/cluster.confscp /etc/fastcfs/fdir/cluster.conf 192.168.0.203:/etc/fastcfs/fdir/cluster.conf
fstore 配置
用 root 登录主控机 192.168.0.201
- 修改fstore集群配置文件
非常重要:
fstore 是存储数据的核心组件,修改 cluster 配置文件,一定要了解 fstore 存储的基本原理。了解 SG(服务器分组),DG(数据分组),DGC(数据分组数)等几个名词的相互关系。上面的拓扑规划时已经简单描述过,更详细查看作者余大的技术文章:https://my.oschina.net/u/3334339/blog/4870261
修改 /etc/fastcfs/fstore/cluster.conf 文件,让 fstore 的集群拓扑为:1个SG,SG 里面包含 3 台服务器(即副本数为3),DGC 为 128,修改后的内容如下:
# the group count of the servers / instancesserver_group_count = 1 # SGC=1# all data groups must be mapped to the server group(s) without omission.# once the number of data groups is set, it can NOT be changed, otherwise# the data access will be confused!data_group_count = 128 #DGC# config the auth config filenameauth_config_filename = ../auth/auth.conf[group-cluster]# the default cluster portport = 21014[group-replica]# the default replica portport = 21015[group-service]# the default service portport = 21016[server-group-1]server_ids = [1, 3]data_group_ids = [1, 64]data_group_ids = [65, 128][server-1]host = 192.168.0.201[server-2]host = 192.168.0.204[server-3]host = 192.168.0.205
server.conf 基本上用默认配置即可,如果需要修改存储目录,需要修改 storage.conf,如果有多个数据盘可以配置多个目录,充分利用硬盘空间。
# the write thread count per store path# the default value is 1write_threads_per_path = 1# the read thread count per store path# the default value is 1,如果有多个盘可以配置多个目录,充分利用硬盘空间read_threads_per_path = 1# usually one store path for one disk# each store path is configurated in the section as: [store-path-$id],# eg. [store-path-1] for the first store path, [store-path-2] for# the second store path, and so on.store_path_count = 1# reserved space of each disk for system or other applications.# the value format is XX%# the default value is 10%reserved_space_per_disk = 10%#### store paths config #####[store-path-1]# the path to store the file,如果有多个盘可以配置多个目录,充分利用硬盘空间path = /opt/faststore/data
- 复制cluster文件到其他节点
fstore 的 cluster.conf, server.conf, storage.conf 配置完成后,把 cluster.conf 配置文件通过 scp 命令复制到其他节点,server.conf 不需要复制:
scp /etc/fastcfs/fstore/cluster.conf 192.168.0.204:/etc/fastcfs/fstore/cluster.confscp /etc/fastcfs/fstore/cluster.conf 192.168.0.205:/etc/fastcfs/fstore/cluster.conf
fauth 配置
用root登录主控机 192.168.0.201
- 修改fauth集群配置文件
修改 /etc/fastcfs/auth/cluster.conf 文件,修改为上面提到的三个IP地址(修改成你自己对应的IP), [sever-1]为192.168.0.201,[sever-2]为192.168.0.204,[sever-3]为192.168.0.205,如果你有更多 fauth 节点,增加配置 [server-N] 即可,修改后的内容如下:
[group-cluster]# the default cluster portport = 31011[group-service]# the default service portport = 31012[server-1]host = 192.168.0.201[server-2]host = 192.168.0.204[server-3]host = 192.168.0.205
- 修改auth.conf开启认证
修改 /etc/fastcfs/auth/auth.conf 文件里面的 auth_enabled = true ,修改后内容:
# enable / disable authentication# default value is falseauth_enabled = true# the username for login# default value is adminusername = admin# the secret key filename of the user# variable $username will be replaced with the value of username# default value is keys/$username.keysecret_key_filename = keys/$username.key# the config filename of auth clientclient_config_filename = client.conf
- 复制cluster文件到其他节点
fauth 的 cluster.conf, auth.conf 配置完成后,把 cluster.conf、auth.conf 配置文件通过 scp 命令复制到其他节点,server.conf 不需要复制:
scp /etc/fastcfs/auth/cluster.conf 192.168.0.204:/etc/fastcfs/auth/cluster.confscp /etc/fastcfs/auth/cluster.conf 192.168.0.205:/etc/fastcfs/auth/cluster.confscp /etc/fastcfs/auth/cluster.conf 192.168.0.203:/etc/fastcfs/auth/cluster.confscp /etc/fastcfs/auth/auth.conf 192.168.0.204:/etc/fastcfs/auth/auth.confscp /etc/fastcfs/auth/auth.conf 192.168.0.205:/etc/fastcfs/auth/auth.confscp /etc/fastcfs/auth/auth.conf 192.168.0.203:/etc/fastcfs/auth/auth.conf
集群启动
集群的配置文件在各个节点已经配置和分发完毕,下面可以开始启动集群了。
启动顺序如下:
-
fdir
-
fauth
-
fstore
用 root 用户分别登录到 3 个节点,执行如下命令:
systemctl restart fastdirsystemctl restart fastauthsystemctl restart faststore
如果启动有问题,请检查配置文件,具体启动日志可以查看 /opt/fastcfs/ 下对应的 auth、fdir、fstore 三个目录里面的logs目录。
客户端启动
如果三个节点的所有组件启动没有错误,在客户端节点可以启动客户端程序,把 FastCFS 的默认 pool fs 挂载到相应目录。
以本次部署为例,root 用户登录到客户端节点 192.168.0.203
,执行命令:
systemctl restart fastcfs
查看日志文件 /opt/fastcfs/fcfs/logs/fcfs_fused.log 看下启动是否有误,如果无误可以通过 df -h 查看挂载的目录 /opt/fastcfs/fuse
df -hFilesystem Size Used Avail Use% Mounted onoverlay 500G 110G 391G 22% /tmpfs 64M 0 64M 0% /devtmpfs 12G 0 12G 0% /sys/fs/cgroupshm 64M 0 64M 0% /dev/shm/dev/mapper/centos-root 500G 110G 391G 22% /etc/hosts/dev/fuse 342G 0 342G 0% /opt/fastcfs/fuse
2.4.3 部署工具fastcfs.sh安装
运维工具 fastcfs.sh 方式的安装,请参考官方文档,这里不赘述:https://github.com/happyfish100/FastCFS/blob/master/docs/fcfs-ops-tool-zh_CN.md
2.4.4 Ansible方式安装(推荐、未完成)
2.4.4 K8S Operator方式安装(未完成)
2.5 验证集群状态
2.5.1 fdir集群状态
查询fdir整个集群状态
fdir_cluster_stat# 输出如下server_id: 1, host: 192.168.0.201:11012, status: 23 (ACTIVE), is_master: 0server_id: 2, host: 192.168.0.204:11012, status: 23 (ACTIVE), is_master: 0server_id: 3, host: 192.168.0.205:11012, status: 23 (ACTIVE), is_master: 1server count: 3
查询 fdir 某个节点状态,1 表示是 server 编号,和 cluster.conf 里面的 server-N 相对应。
fdir_service_stat 1# 输出如下 server_id: 1 host: 192.168.0.201:11012 status: 23 (ACTIVE) is_master: false connection : current: 4, max: 4 binlog : current_version: 48 dentry : current_inode_sn: 5000020, ns_count: 2, dir_count: 10, file_count: 4
2.5.2 fstore集群状态
显示所有状态
fs_cluster_stat# 输出如下:data_group_id: 1 server_id: 1, host: 192.168.0.201:21016, status: 5 (ACTIVE), is_preseted: 0, is_master: 0, data_version: 0 server_id: 2, host: 192.168.0.204:21016, status: 5 (ACTIVE), is_preseted: 1, is_master: 1, data_version: 0 server_id: 3, host: 192.168.0.205:21016, status: 5 (ACTIVE), is_preseted: 0, is_master: 0, data_version: 0.... 省略N个data_group_id: 127 server_id: 1, host: 192.168.0.201:21016, status: 5 (ACTIVE), is_preseted: 0, is_master: 0, data_version: 0 server_id: 2, host: 192.168.0.204:21016, status: 5 (ACTIVE), is_preseted: 1, is_master: 1, data_version: 0 server_id: 3, host: 192.168.0.205:21016, status: 5 (ACTIVE), is_preseted: 0, is_master: 0, data_version: 0data_group_id: 128 server_id: 1, host: 192.168.0.201:21016, status: 5 (ACTIVE), is_preseted: 0, is_master: 0, data_version: 0 server_id: 2, host: 192.168.0.204:21016, status: 5 (ACTIVE), is_preseted: 0, is_master: 0, data_version: 0 server_id: 3, host: 192.168.0.205:21016, status: 5 (ACTIVE), is_preseted: 1, is_master: 1, data_version: 0data server count: 384
显示某个 sg 状态,比如 sg=1
fs_cluster_stat -g 1#输出如下:data_group_id: 1 server_id: 1, host: 192.168.0.201:21016, status: 5 (ACTIVE), is_preseted: 1, is_master: 1, data_version: 0 server_id: 2, host: 192.168.0.204:21016, status: 5 (ACTIVE), is_preseted: 0, is_master: 0, data_version: 0 server_id: 3, host: 192.168.0.205:21016, status: 5 (ACTIVE), is_preseted: 0, is_master: 0, data_version: 0data server count: 3
更多查看
fs_cluster_stat -help
2.5.3 fauth集群状态
fauth_cluster_stat#输出如下:server_id: 1, host: 192.168.0.201:31012, is_online: 1, is_master: 0server_id: 2, host: 192.168.0.204:31012, is_online: 1, is_master: 0server_id: 3, host: 192.168.0.205:31012, is_online: 1, is_master: 1server count: 3
2.6 集群管理
2.6.1 fdir相关操作
fdir 有 fdir_list、fdir_mkdir、fdir_rename、fdir_remove、fdir_getxattr、fdir_setxattr等,还有 fcfs_pool 管理、查看 pool 相关
比如查看 pool fs,可以通过 fdir_list,更多的信息查看用 -help 查看
fdir_list -n fs /
查看 pool 列表
fcfs_pool plist
2.6.2 fstore相关操作
fs_read, fs_write, fs_delete等,相关命令还不熟,研究中…
2.6.3 fauth相关操作
fcfs_user 查看,新增,删除,设置用户权限等
查看用户列表
fcfs_user list
更多操作
Usage: fcfs_user [-c config_filename=/etc/fastcfs/auth/client.conf] [-u admin_username=admin] [-k admin_secret_key_filename=/etc/fastcfs/auth/keys/$username.key] [-p priviledges=pool] <operation> [username] [user_secret_key_filename=keys/$username.key] the operations and parameters are: create <username> [user_secret_key_filename] passwd | secret-key <username> [user_secret_key_filename] [-y]: regenerate user"s secret key grant <username>, the option <-p priviledges> is required delete | remove <username> list [username] [user_secret_key_filename]: specify the filename to store the generated secret key of the user [priviledges]: the granted priviledges seperate by comma, priviledges: user: user management pool: create storage pool cluster: monitor cluster session: subscribe session for FastDIR and FastStore server side *: for all priviledges
2.7 测试集群性能
更多性能测试查看官方测试结果:https://github.com/happyfish100/FastCFS/blob/master/docs/benchmark.md
2.8 Kubernetes CSI 安装与配置
终于到了对 k8s 的支持,作为云原生分布式存储,对 k8s 的支持肯定是少不了的。
2.8.1 用户和pool准备
CSIDriver 必须要求 FastCFS 启用验证模块 auth_enabled = true,因为 k8s 的 CSI 要求支持卷、支持定义容量,不同卷是相互独立的。pool 就是为此设计的,在 CSI Driver 中一个卷就是一个 pool,而 pool 是属于用户进行管理的。
为 CSI 单独创建一个用户:k8s,当然可以用 admin 用户,但不推荐。
fcfs_user create k8screate user k8s success, secret key store to file: keys/k8s.key
新建 k8s 用户成功后会在当前目录下 keys 目录生成 k8s.key 文件,这个文件的内容后面会用到。
查看用户:
fcfs_user list No. username priviledges 1. admin 以上是关于云原生分布式存储系统FastCFS安装简明教程的主要内容,如果未能解决你的问题,请参考以下文章